Mixing Small Amounts of Stain Solver Solution
Use this handy table to help you mix small amounts of Stain Solver solution. These amounts are for MOST indoor applications. If you're working with Stain Solver outdoors, DOUBLE the amount of Stain Solver powder you see below in the table.
Always use warm or hot tap water when mixing Stain Solver. This helps dissolve the powder faster. Use COLD water if removing blood or grass stains.
- Remember, only mix as much Stain Solver solution as you can use in 4-5 hours.
- When you add Stain Solver to water, it immediately creates oxygen gas. The pressure can cause solution to leak from hand-spray bottles. Release pressure every 15 minutes.
|Water||Stain Solver Powder|
|128 ounces (1 gallon)||24 teaspoons (8 tablespoons)|
|64 ounces (1/2 gallon)||12 teaspoons (4 tablespoons)|
|32 ounces (1 quart)||6 teaspoons (2 tablespoons)|
|8 ounces (1 cup)||1-1/2 teaspoons|
|4 ounces (1/2 cup)||3/4 teaspoon|