Clean Red Wine From Clothes – Easy with Stain Solver
You can clean red wine from clothes by just soaking them in Stain Solver for an hour before washing them.
Stain Solver is both color and fabric-safe so you don’t have to worry about ruining your clothes.
Soak the stained clothes on a low water setting in your washing machine or in a bucket.
Add 1/2 cup of Stain Solver to the warm water, stir for 30 seconds then drop in the stained garments. Usually, one hour of soaking is sufficient. If soaking in a bucket, pour the garments AND bucket water into your washing machine to clean the clothes.
Stain Solver is a fantastic cleaner for any outdoor teak furniture. It removes the sun-damaged gray wood fibers as well as sun-damaged stains and clear finishes but doesn’t harm the wood or nearby expensive landscaping.
Here are a few before, during and after photos of our own teak table out on our deck. The step-by-step process to clean the teak is below:
Cleaning Tips & Instructions:
Mix one cup of Stain Solver per gallon of warm or hot water – stir until dissolved completely
Apply the solution to the teak in the shade – be sure the teak is dry so the solution soaks in
Allow the solution to soak for 15-30 minutes – add more solution as needed to keep the teak wet
Scrub with a good scrub brush, rinse and allow to dry
You remove oil from concrete using Stain Solver and some great liquid dish soap.
Stain Solver is a fantastic oil remover, be SURE TO WATCH the end of the video looking at how well Stain Solver removed the oil from the baseball cap.
How Fast Can You Remove the Oil from Concrete?
It’s important to realize you need to allow the Stain Solver to soak into the concrete and the job may take multiple cleaning attempts depending on how old the oil stain is.
Should the Concrete Be Dry and In the Shade?
Yes, you’ll get the best results if the concrete is dry. This allows the Stain Solver to soak into the concrete. You must work in the shade so the solution does not evaporate. You may have to keep the oil stain wet for several hours depending on how deep the oil has soaked into the dense concrete matrix.