How to Clean Marble Floors

stain solver on slate tile grout
How to Clean Marble Floors | You’ll see fizzing bubbles like this when you use Stain Solver on your marble. Copyright 2020 Stain Solver

How to Clean Marble Floors

Use a standard solution of Stain Solver to deep-clean marble floors. It will also clean the grout at the same time.

Mix 4 tablespoons of Stain Solver with each quart of warm or hot water you intend to use. Stir until all the Stain Solver is completely dissolved.

WATCH the following video to see how I’d clean the marble, even though I’m cleaning a tile floor. It’s the SAME PROCESS:

How to Clean Microfiber

clean microfiber
These are two microfiber towels in my own home. I use Stain Solver to make them look like new. Copyright 2020 Stain Solver

How to Clean Microfiber

Stain Solver, a certified organic oxygen bleach made in the USA does a great job of cleaning:

  • microfiber towels
  • microfiber furniture
  • microfiber rags
  • microfiber car-cleaning cloths
  • microfiber hair-drying towels
  • etc.

All you have to do is soak the small microfiber items in a shallow pan for several hours before you normally wash them.

Add 4 tablespoons of Stain Solver powder to each quart of WARM soaking water. Stir for a minute, then dump in the microfiber articles to soak. After soaking dump the articles AND soak water into your washing machine and run it as a normal load with the normal soap you use.

How to Clean Microfiber Furniture

To clean microfiber furniture, spray on the Stain Solver solution getting an entire section of the furniture wet with the solution. WATCH THIS VIDEO to see how to clean furniture.

Add 4 tablespoons of Stain Solver to each quart of warm soaking water. Stir for twenty seconds then drop in the microfiber items.

Dump the soak water into the washing machine for the BEST cleaning results.

Questions?  CLICK HERE to ask them.

stain solver certified organic logo

How to Clean Roof Moss

roof moss
See the THICK roof moss? Don’t confuse moss with algae. Algae is an ultra-thin organic coating on things. Moss is thick like a plant.

How to Clean Roof Moss

Stain Solver will clean your roof once you remove the roof moss with a stiff scrub brush or street broom. Don’t expect Stain Solver to magically dissolve roof moss.

Once the moss is removed, you can then use Stain Solver to clean your roof.

CLICK or TAP HERE to see how easy it is to clean the remaining algae from your roof. There’s a great video there.

Watch this video to see how to STOP the moss once you’ve cleaned your roof. You can purchase the copper from me. CLICK or TAP HERE.

How Long Does Stain Solver Last

Stain Solver, once mixed with water, lasts only six hours.

This means you can’t mix some up and save it for when you need it days later.

Remember, always mix Stain Solver with HOT or WARM water and stir until ALL of the powder dissolves.

Is Stain Solver Safe

SS02 Stain Solver Bottle with scoop

Stain Solver Safety – Stain Solver is a Safe Oxygen Bleach

Ron reached out to us and asked a very valid question:

“I can likely use some Stain Solver, but I’m terrified about products like this.  I bought and then disposed of CLR because I kept thinking of how dangerous it must be.  Stain Solver, as a bleach, seems equally scary and dangerous.  I don’t recall you ever discussing the safety aspects of the product.”

It’s important to realize Stain Solver is a chemical. Fortunately, Stain Solver is a very safe chemical.

For all intents and purposes, Stain Solver is a dried form of hydrogen peroxide, not too much different than the product you buy at the grocery to clean wounds.

When you mix the pure certified organic Stain Solver powder with clear clean water you get three things in the magic chemical solution:

  • more water
  • pure oxygen micro bubbles
  • natural soda ash


Video Transcript:

Hi, Tim Carter co-founder of Stain Solver. You may be curious exactly how certified organic Stain Solver gets all of your water washable things clean.

You start an immediate safe and simple chemical reaction when you add Stain Solver powder to warm or hot water. Billions of tiny oxygen bubbles are released. Look at how they fizz and move on their own, in this tea stained mug.

These oxygen bubbles attack stains, mildew, mold and dirt. The longer you allow the bubbles to work on their own, the less work you have to do to clean up any stains.

Stain Solver is certified organic. It’s color and fabric safe and the two ingredients in Stain Solver are both made in the USA.

If you’ve got questions about Stain Solver, go to the FAQ page at StainSolver.com, or give us a call. Our phone number is at the bottom of every page of Stain Solver.

Remember Stain Solver is certified organic.

That’s why Stain Solver is so safe! The pure oxygen ions are the active part of the clear liquid solution and they’re what does all the work to clean, to deodorize, and to restore and renew hundreds of things in and outside your home.

CLICK or TAP HERE to watch several videos showing you how to use Stain Solver to clean things.

How do Stain Solver and Chlorine Bleach Compare?

Chlorine bleach is a very powerful and dangerous chemical. You must treat it with the utmost respect.

Mixed with other common chemicals around the home, and you can create toxic deadly chlorine gas. People do die each year poisoned by chlorine gas.

Chlorine bleach is such a strong oxidizer that it destroys the bonds that hold fabric threads together. This is why your clothes shred and tear apart easily after you wash them in chlorine bleach a number of times.

Chlorine bleach is so powerful it breaks down the molecules of synthetic dye. This is why when you wash your clothes or get a drop of pure chlorine on anything, the color either fades or disappears entirely.

Chlorine bleach is TOXIC to outdoor vegetation and plants. A past neighbor of mine killed a giant maple tree using chlorine bleach to clean her patio stones.

Stain Solver doesn’t create toxic gas. Stain Solver is fabric and color safe. Stain Solver is not toxic to plants.

Safe Around and On Vegetation

Stain Solver is SAFE to use around all vegetation and expensive landscaping.

The solution adds beneficial OXYGEN to the soil around the plants.

stain solver vegetation safe
You can spray Stain Solver solution onto these flowers and it will cause no harm. The same is true for any vegetation around houses, sidewalks, or patios.

 

How to Clean Slipcovers

How to Clean Slipcovers – Let Them Soak, Then Wash

It’s easy to clean slipcovers, or a single slipcover, like this one using certified organic Stain Solver. Directions are below

how to clean slipcovers
This dingy slipcover can be cleaned with ease, especially if your washing machine has a soak cycle. Look below for directions.

How to Clean Slipcovers Tips:

  • remove slipcover and place in the washing machine
  • add 1/2 cup of Stain Solver
  • adjust washing machine settings to SOAK
  • be sure slipcover is immersed in a small amount of water in the machine
  • let soak for three hours, then proceed with the normal wash cycle

SHARE your slipcover Before and After photos!  CLICK or TAP HERE, fill out the form and upload your photos!

Here’s another photo of a typical slipcover:

how to clean slipcovers
Slipcovers do a great job of preventing wear on expensive couches and chairs.

stain solver

How To Clean Vitamix

How to Clean Vitamix®

You clean your Vitamix® blender the same way I clean my regular blender. Here’s my fruit-stained blender:

how to clean vitamix
A Vitamix blender is made with the same acrylic body as this blender. Fruit and vegetable ingredients get into the scratched surface of the blender. Stain Solver REMOVES the stains with NO SCRUBBING!

All you do is fill the blender to the top with WARM water and dump in two tablespoons of certified organic Stain Solver.

Then walk away.

Here’s what your blender will look like in a few hours:

how to clean vitamix
Yes, you can get your Vitamix blender this clean. It may not be as clear as this once done because you might have scratched your blender container with nuts and icy fruit.

stain solver

Clean Oil From Blacktop

oil spots on blacktop
Clean Oil From Blacktop | These fresh oil spots would disappear in no time using Stain Solver and a little liquid dish soap. Copyright 2019 Stain Solver Corp

Clean Oil from Blacktop, Hot top, Asphalt, and ChipSeal

Stain Solver does a great job of cleaning fresh oil spills or drippings from blacktop. It also works to clean oil from:

  • hot top or hottop
  • asphalt
  • chipseal

Watch this video to see how I’d do it if I came to your home. I’m cleaning oil from concrete, but the process is the same for blacktop, hot top, asphalt, tar and chip, or chipseal.

 

Video Transcript:

Hi, I’m Tim Carter co-founder of Stain Solver, and I want to show you how to remove oil stains from concrete. Let’s get started.

Mix two tablespoons of Stain Solver with 16 ounces of warm or hot water. Stir for one minute, until all of the Stain Solver powder dissolves. Apply the solution to dry concrete for the best results. Work in the shade, in the cool part of the day.

Allow the solution to work for at least one hour. Add more solution to ensure that oil spot is wet with a solution. After one hour, add Dawn liquid dish soap to the area and scrub to create a lather. Add more Stain Solver solution and scrub a little more. After another hour, scrub several times, rinse and allowed to dry.

Oil and concrete is absolutely in the top 10 toughest stains for Stain Solver to tackle. Here’s why. The oil can soak into the dense matrix of the concrete. It takes a while to get it back out.

Stain Solver is an excellent degreaser. It really, really works well, and of course that’s what oil is. It’s a grease.

Here’s what you need to know. After it has worked for a while, you might even try to broadcast some of the Stain Solver powder onto the solution. Scrub it in. The key is to let the solution work for a long time. Keep it wet with a solution. It may take an hour or two or three. Go ahead scrub a lot. Rinse it. Let it dry.

See if the stain is lighter. If it is, you’re making progress. It may take two or three attempts to get the stain out, and believe me, if you have a fresh oil stain, attack it immediately! The fresher the oil is, the easier it is to get out.

It’s that simple. If you have more questions, go to the FAQ page at stainsolver.com. If you want to talk to us on the phone, it’s easy to do. Our phone number is at the bottom of every single page of stainsolver.com.

Remember Stain Solver is your everyday, everything, certified organic cleaner.

How to Clean Teak Furniture

Stain Solver is a fantastic cleaner for any outdoor teak furniture. It removes the sun-damaged gray wood fibers as well as sun-damaged stains and clear finishes but doesn’t harm the wood or nearby expensive landscaping.

Here are a few before, during and after photos of our own teak table out on our deck. The step-by-step process to clean the teak is below:

clean teak furniture
This is what the teak looked like before I started cleaning it with Stain Solver. Copyright 2019 Stain Solver Corp.
clean teak furniture
Here’s the after photo but I got ahead of myself and had already applied the stain to the center section. See how the Stain Solver did NOT harm the gorgeous brown color of the natural teak? Copyright 2019 Stain Solver Corp.
clean teak furniture
This is the finished product. Doesn’t it look amazing? I did this in just a few hours. CLICK or TAP HERE to order now. You’ll need 4.5 pounds for a job like this.

Cleaning Tips & Instructions:

  • Mix one cup of Stain Solver per gallon of warm or hot water – stir until dissolved completely
  • Apply the solution to the teak in the shade – be sure the teak is dry so the solution soaks in
  • Allow the solution to soak for 15-30 minutes – add more solution as needed to keep the teak wet
  • Scrub with a good scrub brush, rinse and allow to dry